34ENGLISH
When the green “
” light starts flashing slowly, turn the control dial to the “
” position. The red “
” light turns on.
Empty the large container and the drip tray and place them back.
Rinsing Cycle 1
Rinse the water tank and fill it up to the MAX level with fresh water.
Put it back in the machine.
When the green “
” light turns on, turn the control dial to the “ 
” position. The machine will prime its internal circuits.
After this, the green “
” light starts flashing slowly. Turn the control dial to the “
” position.
The machine dispenses water internally in the drip tray. It does not dispense through the hot water/steam wand.
When the green“
” light turns on, turn the control dial to the “ 
” position. The machine now dispenses through the hot water/
steam wand until the water tank is empty.
Note:
If you want to stop dispensing (for example to empty the container), turn the control dial to the “
” position. To restart dispensing, turn the control dial back to the “ 
” position.
