4 Get started
Caution
•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus.Write the numbers here: Model No. __________________________
Serial No. ___________________________
Turn on
1Press 
.
»The unit switches to the last selected source.
2Wait for automatic setup of wireless connection between the main unit and subwoofer.
»[PAIRING] (pairing) fl ashes.
»If the connection succeeds, [PAIR OK] (pair OK) is displayed and the blue indicator on the subwoofer lights up.
»If the connection fails, [PAIR FAIL] (pair fail) is displayed and the green indicator on the subwoofer lights up.
»If the wireless connection fails, set up the connection manually.
English
Set up wireless connection manually
1In standby mode, press and hold SOURCE
on the main unit for 3 seconds. » [PAIRING] (pairing) fl ashes.
2Press and hold PAIR on the subwoofer for 3 seconds.
»The blue and green indicators on the subwoofer fl ash alternately.
»If wireless connection succeeds, [PAIR OK] (pair OK) is displayed and the blue indicators on the subwoofer lights up.
3Turn on the main unit again.
Note
•If the wireless connection fails again, check whether there is any confl ict or strong interference (for example, interference from other electronic devices) around your location.After removal of the confl ict or strong interference, repeat the above procedures.
Find the correct viewing channel
1Press DISC to switch to disc mode.
EN 17
