Speaker settings
1 Press .
2 Select [Setup], and then press OK.
3 Select [Advanced], and then press OK.
4 Press the Navigation buttons and OK to select and change:
•[Enhanced audio]: Select [On] to enable audio post processing at the speaker and enable karaoke settings (if your product supports Karaoke). To play the original audio of the disc, select [Off].
Tip
•• Enable audio post processing before you select a predefined sound mode (see 'Sound mode' on page 21).
7 Update software
Philips continually tries to improve its products. To get the best features and support, update your
Compare the version of your current software with the latest version on www.philips.com/ support. If the current version is lower than the latest version available on the Philips support website, upgrade your
Caution
•• Do not install a lower version of software than the current version installed on your product. Philips is not liable for problems caused due to software downgrade.
E n g l i s h
Restore default settings
1 Press 
.
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Restore default settings], and then press OK.
4 Select [OK], and then press OK to confirm.
»»Your
Check software version
Check the version of the current software
installed on your | |
1 | Press . |
2 | Select [Setup], and then press OK. |
3 | Select [Advanced] > [Version |
information].
»»The software version is displayed.
Update software through
USB
What you need
•A USB flash drive that is FAT or NTFS- formatted, with at least 256MB of memory. Do not use a USB hard drive.
•A computer with Internet access.
•An archive utility that supports the ZIP file format.
EN 25
