16
Select a play source
On the main unit
Press • SOURCE button repeatedly to
select: DISC > USB > FM > AUX 1 >
AUX 2 > DISC ...
On the remote control
Press • AUDIO SOURCE repeatedly to
switch to the connected audio source.
Display Device connected to
AUX 1 AUDIO IN-AUX 1 jacks
AUX 2 AUDIO IN-AUX 2 jacks
Press • RADIO to switch to FM band.
Press • USB to switch to USB mode.
Press • DISC to switch to disc mode.
2 Press to change the volume level,
then press OK .
The test tone is emitted from the »speaker.
Repeat the above setting for other • speakers until all the speakers output
level sounds equally balance.
To exit the menu, press • SETUP .
To set the output delay time (center and rear
speakers only)
1 Select [Speakers Delay] in the menu,
then press .
2 Press to set the delay time, then press
OK . Repeat the above setting for other • speakers until the sound output from
different speakers reach the listening
position at the same time.
To exit the menu, press • SETUP .
Tip
Set a longer delay time if the center speaker or • rear speaker is closer to the listening position
than the front speaker.
Allow 1ms setting for every 1 foot distance • between the speaker and the listening position.
Speakers Distance Setup
Center
Rear Left
Rear Right
0MS
0MS
0MS
EN