Turn on Progressive Scan
If you connect this unit to TV with the component video connection (see chapter ‘Connect video cables - Option 3: Connect to component video jack’ for details), you can turn on the progressive scan output if your TV supports progressive scan.
1Turn on the TV to the correct viewing channel for this unit.
2Press DISC MENU.
3Press
OPTIONS.
4Press V to select
[ Video Setup ] in the menu, then press B.
Video Setup
TV Type | RGB |
TV Display | YUV |
Picture Settings |
|
Advanced Picture |
|
Closed Caption |
|
Progressive |
|
Component Video |
|
5 Select [ Component Video ] > [ YUV ], | |
then press OK. |
|
Video Setup
TV Type | On |
TV Display | Off |
Picture Settings |
|
Advanced Picture |
|
Closed Caption |
|
Progressive |
|
Component Video |
|
6Select [ Progressive ] > [ On ], then press
OK.
A warning message is displayed.
7To proceed, select [ OK ] in the menu
and press OK.
The progressive setup is complete.
Note
•If a blank/distorted screen is displayed, wait for 15 seconds for the auto recover.
•If no picture displayed, turn off the progressive scan mode as follows:
1)Press Z to open the disc compartment.
2)Press B.
3)Press SUBTITLE.
8To exit the menu, press 
OPTIONS.
9You can now turn on the progressive scan mode on your TV (see the TV user manual).
Note
•There are some progressive scan TVs that are not fully compatible with this unit, resulting in an unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode. In such case, turn off the progressive scan feature on this unit and your TV.
22EN
