10 Troubleshooting
Warning |
• Risk of electric shock. Never remove the casing of |
the Home Theater System. |
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using the Home Theater System, check the following points before requesting service. If the problem remains unsolved, register your Home Theater System and get support at www.philips.com/ welcome.
If you contact Philips, you will be asked for the model and serial number of your Home Theater System. The model number and serial number are on the back or bottom of your Home Theater System. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this Home Theater System do not work.
•Disconnect this Home Theater System from the power outlet for a few minutes, then connect again.
•Ensure that the interconnect cable from the subwoofer is connected to the Home Theater System.
It takes a long time for the Home Theater System to power up.
•This green product has low standby power consumption which requires longer time to power up. For shorter power up time:
1)Press OPTIONS.
2)Press , then select [ Standby Mode ] in the menu.
3)Select [ Normal ].
Picture
No picture.
•See TVs manual for correct video input channel selection. Change the TV channel until you see the DVD screen.
•Press DISC MENU.
•If you have changed the TV type setting, switch back to default mode:
1)Press to open the disc compartment.
2)Press .
3)Press SUBTITLE.
•If you have changed the progressive scan setting, switch back to default mode:
1)Press to open the disc compartment.
2)Press .
3)Press SUBTITLE.
No picture on HDMI connection.
•Check if the HDMI cable is faulty. Replace a new HDMI cable.
•If this happens when you change the HDMI video resolution, press HDMI repeatedly until the picture appears.
48EN