Access DVD menu
1Press DISC MENU to access disc main menu.
2Select a play option, then press OK.
•In some menus, press number buttons to input your selection.
•To return to the title menu during playback, press
BACK.
Access VCD menu
The PBC (Playback Control) for VCD is turned on by default in the factory. When you load in a VCD, the contents menu is displayed.
1Press vV to select a play option, then press OK to start play.
•If PBC is off, it skips the menu and starts play from the rst title.
•During playback, you can press
BACK to return to the menu (if the PBC mode is on).
Tips
•The default setting for PBC is on. To change the default setting, see chapter ‘Adjust settings’ -
[ Preference Setup ] > [ PBC ] for details.
Sync audio output with video play
(sound does not match with the pictures,) you | English |
If the video play is slower than the audio output |
|
can delay the audio output to match the video. |
|
| Play |
1Press and hold AUDIO SYNC until ‘AUDIO SYNC XXX’ is displayed.
• ‘XXX’ denotes the delay time.
2Within ve seconds, press VOL +- to set the delay time for audio output.
Note
•If the volume control is not used within 5 seconds, it resumes normal volume control function.
EN 27
