Audio setup
1Press OPTIONS.
[ General Setup ] menu is displayed.
2Press V to select [ Audio Setup ], then press B.
3Select an option, then press OK.
Audio Setup
Ambisound Setup |
HDMI Audio |
Night Mode |
4Select a setting, then press OK.
•To return to the previous menu, press BACK.
•To exit the menu, press OPTIONS.
[ Ambisound Setup ] Change the Ambisound setup.
Options | Descriptions |
[ Setup | Select this if you want to go |
Guide ] | through the complete |
| Ambisound settings. |
|
|
[ Room | Select the type of walls that |
Acoustics ] | surround your room. |
|
|
[ Room | Select this unit placement in |
Placement ] | the room. |
|
|
[ Height ] | Select the height at which this |
| unit is placed. |
[Listening Select the distance between
Position ] | your listening position and this |
| unit. |
|
|
Tips |
• See chapter ‘Get Started - Start Ambisound setup’ |
for detailed information. |
[ HDMI Audio ]
When you connect this unit and TV with HDMI cable, select the audio output setting for this connection.
•[ On ] – the sound is output through both your TV and this speaker system. If the audio format on the disc is not supported, it will be downmixed to
•[ Off ] – disable audio output from your TV. The sound is only output through this speaker system.
[ Night Mode ]
Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others.
•[ On ] – for quiet viewing at night (DVDs only).
•[ Off ] – enjoy surround sound with a full dynamic range.
40EN