7 Adjust settings
This section describes the various setting options of this unit.
Symbol Options
[ General Setup ]
[ Audio Setup ]
[ Video Setup ]
[ Preference Setup ]
Note
•Underlined options are the factory default settings
General setup
1Press OPTIONS.
[ General Setup ] menu is displayed.
2Press B.
3Select an option, then press OK.
General Setup
EasyLink |
Disc Lock |
Display Dim |
OSD Language |
Screen Saver |
Sleep Timer |
Standby Mode |
DivX(R) VOD Code |
•See the explanations of the above options in the following pages.
4Select a setting, then press OK.
•To return to the previous menu, press BACK.
•To exit the menu, press OPTIONS.
[ EasyLink Setup ]
This feature is only applicable if this unit is connected to HDMI CEC compliant TV/device. It enables all the linked devices response or react to certain commands simultaneously with one touch control.
Options Descriptions
[Auto Wake- It
up TV ] | automatically when you press |
| PLAY to power up this unit |
| and start disc play (if a video |
| disc is found in the disc |
| compartment). |
| • To disable this feature, |
| select [ Off ]. |
[System Respond to standby command Standby ] from other HDMI CEC
compliant TV/devices.
•To disable this feature, select [ Decline ].
[System Audio It enables this DVD Home
Control ] | Theatre unit to switch |
| automatically to the audio |
| input of the active device. |
| • To enable this feature, |
| select [ On ]. Then |
| proceed to [ Audio Input |
| Mapping ] to scan and map |
| all the connected devices. |
[Audio Input Map the audio input to the Mapping ] connected TV/devices
correctly to enable automatic switching of input source.
1.Press OK to start scanning of devices.
2.Select the audio input to map (e.g. AUX1 Input, AUX2 Input), then press B.
3.Select the correct device that connected to this audio input, then press OK.
38EN