Philips HTS8141/12 Activate EasyLink control, Map the audio inputs to the connected devices

Activate EasyLink control

This feature is only applicable if this unit is connected to HDMI CEC compliant TV/device. It enables all the linked devices response or react to certain commands simultaneously with one touch control.

1Turn on the HDMI CEC operations on your TV and other connected devices. See TVs/devices manual for details.

2You can now enjoy the EasyLink controls.

One touch play [ Auto Wake-up TV ]

When you press PLAY button, this unit will wake- up from standby mode and start disc play (if a video disc is found in the disc compartment) and it will also turn on your TV and switch to the correct viewing channel.

One touch power off [ System Standby ]

When you press and hold STANDBY button for at least three seconds, it will turn off this unit and all the linked devices to standby.

This unit also responses to standby command from other HDMI CEC devices.

One touch audio input switching [ System Audio Control ]

This unit is able to render the audio signals from the active source. It switches automatically to the corresponding audio input and output the sound from its speaker system.

•Before you can enjoy this function, you have to map the audio inputs to the connected devices.

•You can use any HDMI CEC TV/device remote control to adjust the volume.

Note

•To enable one touch play function, a video disc must be placed in the disc compartment before operation.

•Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices.

Map the audio inputs to the connected devices

Note

•Before you start, ensure that an audio connection has been made between this unit and your TV/ devices.

1Press DISC MENU.

2Press OPTIONS..

￿ [ General Setup ] menu is displayed.

3Press B.

4Select [ EasyLink ], then press B.

General Setup

EasyLink	Auto Wake-up TV
Disc Lock	System Standby
Display Dim	System Audio Control
OSD Language	Audio Input Mapping
Screen Saver
Sleep Timer
Standby Mode
DivX(R) VOD Code

•[ Auto Wake-up TV ] and [ System Standby ] functions are turned on by default in the factory.

5Select [ System Audio Control ] > [ On ], then press OK.

6Select [ Audio Input Mapping ], then press OK.

English

Get started

EN 23