Philips HTS9800W Getting Started continued, Setting the TV, English, Helpful Hints, Ntsc, Multi

Getting Started (continued)

English

D Use ST keys to select a language and press OK to confi rm.

If the language you want is not in the list, then select { Others }.

Use the numeric keypad (0-9) on the remote to enter the 4-digit language code ‘XXXX’ (see page 256) and press OK to confi rm.

E Repeat steps C ~ D for other settings.

Helpful Hints:

–During DVD playback, you can switch the audio and subtitle languages by pressing the AUDIO and SUBTITLE buttons on the remote control. However, this does not change the default settings you have made here.

–For some DVDs, the subtitle/audio/menu language can only be changed via the DVD disc menu.

TIPS: PressÑto return to the previous menu item. Press SYSTEM MENU to exit the menu.

Step 4: Setting the TV

Selecting the matching colour system

The colour system of the DVD system, DVD and TV should match. Only then will it be possible to play a DVD on this system. Before changing the TV system, determine the colour system of your TV.

A In ‘DISC’ mode, press SYSTEM MENU on the remote control.

B Press X repeatedly to select { Video Setup Page }.

C Press T to highlight { TV Type }, then press X.

Video Setup Page

TV Type	PAL
TV Display	NTSC
Progressive	Multi
Picture Setting
Component
HDMI Setup

{PAL }

Select this if the connected TV has the PAL colour system. It will change the video signal of an NTSC disc and output it to PAL format.

{NTSC }

Select this if the connected TV has the NTSC colour system. It will change the video signal of a PAL disc and output it to NTSC format.

{Multi }

Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

D Select one of the options and press OK to confi rm.

Follow the instructions shown on the TV to confi rm the selection (if any).

If a blank/distorted TV screen appears, wait for 15 seconds for the auto recovery.

24