Philips HTS9800W Getting Started continued, English, If no picture is displayed, Helpful Hint

Getting Started (continued)

English

G Select { Progressive } > { On }, then press OK to confi rm.

Video Setup Page

TV Type
TV Display
Progressive	On
Picture Setting	Off
Component
HDMI Setup

H The menu below will appear on the TV.

HINTS:(refer to the owner's manual)

ACTIVATING PROGRESSIVE:

1.Ensure your TV has progressive scan.

2.Connect with YPbPr(GBR) video cable.

3.If there is a blank screen on normal TV, wait 15 seconds for auto recover.

OK Cancel

I PressÑto highlight OK in the menu and press OK to confi rm.

There will be no picture on your TV at this state until you switch on the progressive scan mode on your TV.

J Switch on your TV’s progressive scan mode (refer to your TV user manual).

The below menu will appear on the TV.

Confirm again to use progressive scan

If picture is good press OK on remote

OK Cancel

K PressÑto highlight OK in the menu and press OK to confi rm.

The setup is complete now and you can start to enjoy the high quality picture.

If no picture is displayed :

Wait for 15 seconds for the auto recovery.

OR

A Deactivate the Progressive Scan feature by pressing the ç(EJECT) on the front panel.

B PressÉon the remote control.

C Press SUBTITLE on the remote control.

The blue DVD background screen will appear on the TV.

Helpful Hint:

–There are some progressive scan TV and High-Defi nition TV sets that are not fully compatible with this DVD system, resulting in the unnatural picture when playing back a DVD VIDEO disc under the progressive scan mode. In such a case, switch off the progressive scan feature on both the DVD system and your TV set.

TIPS: PressÑto return to the previous menu item. Press SYSTEM MENU to exit the menu.

26