Philips HTS9800W Setting the Sleep timer, Using the remote to operate your ‘Philips’ television

Sound and Volume Controls (continued)

English

Setting the Sleep timer

The sleep timer enables the system to switch to standby mode automatically at a preset time.

A Press and hold DIM on the remote until “SLEEP XX” appear on the display panel

Using the remote to operate your ‘Philips’ television

STANDBY

4

ON

1

(XX = 15, 30, 45, 60 or OFF).

B To select the next sleep timer value,	2
press DIM button again while in sleep
timer mode until it reaches the desired
preset switch-off time.
‘SLEEP’ will be showed on the display
panel, except if “OFF” is selected.
Before the system switches to standby
mode, a countdown of 10 seconds is
displayed.
“SLEEP10”  “SLEEP 9”.... 
“SLEEP1”  “SLEEP”	3
To cancel the sleep timer

Press and hold DIM until “OFF” appears or press the STANDBY2 button.

Dimming system’s display screen

In any active mode, press DIM on the remote to select the desired brightness :

DIM 1 : 70% brightness

DIM 2 : 50% brightness

DIM 3 : 25% brightness

DIM OFF : normal brightness

A Press SOURCE button until “TV” appears on the display panel.

B Press . / > or use the numeric keypad (0-9) to select the TV’s channel.

C Press TV VOL +/- to adjust the TV’s volume level.

D Press and hold STANDBY2 to switch off your TV.

48