Philips HTS9800W DVD System Menu Options continued, Stereo, HDMI Audio, PCM Only, English

DVD System Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

Analog Output This feature enables you to set the analogue output to match your DVD system’s playback capability.

{ Stereo }	– Select this to change the channel output to
	stereo that delivers sound from only the
	front speakers and subwoofer.

{Multi-channel}– Select this to enable surround sound output from all speakers (except REAR CENTER) and the subwoofer.

{6.1 Multi-channel }–Select this to enable surround sound output from all speakers and the subwoofer.

HDMI Audio	For HDMI connections, you are able to select the HDMI audio
	output selections. The available options will be displayed once
	you have connected the HDMI device. (see page 19).
	It may take a while for the DVD system and the input
	device to communicate and initialise.
	{ Off }	–	Select this to switch off HDMI audio output.
	{ All }	–	Select this if you have connected the DVD
			system to a multichannel decoder/receiver.
	{ PCM Only }	–	Select this only if your HDMI TV or receiver
			is not capable of decoding multichannel audio.

Speaker Setup This feature allows you to to optimise the sound according to your surroundings and setup.

{Speakers Volume } – Access the speakers level setup menu. See “Step 5: Setting the speakers’ channels”

{Speakers Delay } – Access the speakers distance setup menu. See “Step 5: Setting the speakers’ channels”

CD Upsampling This feature enables you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you have activated the CD upsampling feature, the system will automatically switch to stereo mode.

Note: If you press SURR. button on the remote control to select multichannel mode, it will disable the CD upsampling feature.

English

39