Philips HTS9800W user manual Troubleshooting continued, Problem, Solution, English

Models: HTS9800W

1 55
Download 55 pages 36.35 Kb
Page 52
Image 52
English

English

Troubleshooting (continued)

Problem

Solution

 

 

No HDMI audio output.

No HDMI video output.

There is interference on your HTS9800W rear speakers or existing wireless network in your home.

You will not hear any sound from the HDMI output if the source device is only DVI/HDCP (High-bandwidth Digital Content Protection)-compatible.

It is not possible to output SACD or copy-controlled DVD- Audio sources from the HDMI connection.

HDMI connection can only be made to HDMI-equipped devices with HDCP (High Bandwidth Digital Content Protection.) If you wish to connect to a DVI connector (equipped with HDCP,) you will need a separate adaptor (DVI to HDMI.)

Make sure the resolution of this DVD system matches the device you have connected using the HDMI. See “DVD System Menu Options - Video Setup Page”.

You need to switch to another frequency channel to avoid bandwidth interference by other wireless devices.

To switch the frequency channel, press and hold the SOUND key on the remote control for 5 secs.

You will see the channel numbers (1- 4) fl ashing on the display panel of your DVD system.

52

Page 52
Image 52
Philips HTS9800W Troubleshooting continued, Problem, Solution, No HDMI audio output No HDMI video output, English