Philips 20 series, LC4043 manual Picture control, Operation, English, Tip for Windows users

A/V mute

8. OPERATION Picture control

Data display adjustments

For data signal input, the following adjustments can be made:

–shift - adjusts the computer image in horizontal and vertical direction to centre it on the screen;

–horizontal size - adjusts the computer image in a horizontal direction to make the image completely fill the screen;

–phase - when connecting the projector to your PC for the first time, be sure to adjust the phase control for optimal readability of the projected text;

–brightness - adjusts the black level to the room brightness;

–contrast - adjusts the overall contrast intensity;

–white point - adjusts the overall picture impression from warm white to cool white.

Tip for Windows users:

To adjust horizontal size and phase correctly:

1.Select ‘Start’ and then ‘Shut down’.

2.Adjust the projectors horizontal size control, so that no vertical bars are visible.

3.Now adjust the projectors phase control for optimal readability.

4.Press ‘No’ in the Windows shutdown screen to cancel the shutdown action.

1.Press DATA to select data input.

– DATA appears on the screen.

Data

2.Press MENU.

–The menu bar appears on the screen; DISPLAY is highlighted and its sub menu is shown.

3.Use Cursor Control to select the item to be adjusted.

Display Audio Source Display Audio Source

Shift	Shift
Hor . size	Hor . size
Phase	Phase
Brightness	Brightness
Contrast	Contrast
White point	White point
Use cursor control to select
Press OK or — to invoke item	Use cursor control to adjust
Press MENU to exit menu	Press OK or — to accept

4.Press OK (–/––) to activate the selected item.

5.Use Cursor Control to make the required adjustment in the action window.

6.Press OK (–/––) to confirm and store the adjustment.

7.If required, select the next item to be adjusted or press MENU to exit.

Data mode selection

When set to AUTO, the projector can automatically identify the signal type of the connected computer. However, if the signal does not match the known computer signal standards, automatic identification can be overruled. The required data mode can then be selected as described below:

1.Select Data.

–Data appears on the screen.

2. Press MENU.

–The menu bar appears on the screen.

3.Use Cursor Control to select SOURCE in the menu bar.

– DATA is highlighted.

			Data	Display	Audio	Source
						√Data
						Video
						S - Video
						Auto start
						Monitor out
				√:Currently selected source
				Use cursor control to select
				Press OK or — to invoke item
				Press MENU to exit menu
4.	Press OK (–/–	–) to activate the DATA item.
5. Use Cursor Control to select
				Display	Audio	Source
	the required data mode in the					√Data
	action window.					Video
						S - Video
6.	Press OK (–/–	–) to confirm and				Auto start
	store the adjustment.					Monitor out

7.If required, select another item

you wish to adjust or press	AUTO	VGA400 VGA
	SVGA	XGA
MENU to exit.	Use cursor control to select
	Press OK or — to accept

Video display adjustments

For video signal input, the following adjustments can be made:

–brightness - adjusts the black level to the room brightness;

–contrast - adjusts the overall contrast intensity;

–saturation - adjusts the colour saturation of the projected image;

–hue (only for NTSC) - adjusts the tint of the projected image;

–white point - adjusts the overall picture impression from warm white to cool white.

1.Press VIDEO to select video signal or S-video signal as the current projection source.

The button toggles between video and S-video signal.

–VIDEO or S-VIDEO appears on the screen.

Video S - Video

English

Notes:

–When you have selected the menu mode, you cannot use the source selection buttons on the projector or on the remote control to select another input. You can only change to another input via the SOURCE menu.

– A(audio)/V(video)-mutecan only be selected with the A/V MUTE button on the projector or on the remote control.

A/V mute then appears on the screen.

2.Press MENU.

–The menu bar appears on the screen; DISPLAY is highlighted and its sub menu is shown.

3.Use Cursor Control to select the item to be adjusted.

Display	Audio	Source	D i s p l a y	Audio	Source
Brightness			B r i g h t n e s s
Contrast			C o n t r a s t
Saturation			S a t u r a t i o n
Hue			H u e
White point			White point

Use cursor control to select	Cool	Warm
Press OK or — to invoke item	Use cursor control to adjust
Press MENU to exit menu	Press OK or — to accept

4.Press OK (–/––) to activate the selected item.

5.Use Cursor Control to make the required adjustment in the action window.

15