Philips 20 series, LC4043 manual Personal Preferences/Other settings, Operation, English

Video S - Video Data

Use cursor control to select Press OK or — to accept

8. OPERATION Personal Preferences/Other settings

Audio	Source	P . Pref .	Audio	Source	P . Pref .
		Recall			Recall
		Store			Store
		Reset			Reset
			P . Pref - 1 P . Pref - 2 P . pref - 3
Use cursor control to select				Quit
Press OK or — to invoke item			Use cursor control to select
Press MENU to exit menu			Press OK or — to accept

6.Press OK (–/––) to activate the STORE item.

7.Use Cursor Control to select P. PREF 1, 2 or 3 in the action window.

Note: If you select Quit, you will exit the action window and your settings will not be stored in the P. Pref. memory

8.Press OK (–/––) to confirm and store the Personal Preferences.

9.If required, select another item you wish to adjust or press MENU to exit.

Calling up Personal Preferences

1.Select the required input (Video, S-Video, Data).

2.Press MENU.

–The menu bar appears on the screen.

3.Use Cursor Control to select P. Pref (Personal Preferences) in the menu bar.

4.Use Cursor Control to select RECALL from the submenu.

Audio	Source	P . Pref .	Audio	Source	P . Pref .
		Recall			Recall
		Store			Store
		Reset			Reset
			P . Pref - 1 P . Pref - 2 P . pref - 3
Use cursor control to select				Quit
Press OK or — to invoke item			Use cursor control to select
Press MENU to exit menu			Press OK or — to accept

5.Press OK (–/––) to activate the RECALL item.

6.Use Cursor Control to select the required Personal Preference (P. Pref 1, 2 or 3) in the action window.

Note: If you select Quit, you will exit the action window and your settings will not be stored in the P. Pref. memory

7.Press OK (–/––) to confirm and store the selection.

8.If required, select another item you wish to adjust or press MENU to exit.

Changing Personal Preferences

1.Select the required input (Video, S-Video, Data).

2.Make the new adjustments, as described under ‘Picture Control’ and ‘Audio Control’.

3.Press MENU.

–The menu bar appears on the screen.

4.Use Cursor Control to select P(ersonal) PREf(erences) in the menu bar.

5.Use Cursor Control to select STORE from the submenu.

Audio	Source	P . Pref .	Audio	Source	P . Pref .
		Recall			Recall
		Store			Store
		Reset			Reset
			P . Pref - 1 P . Pref - 2 P . pref - 3
Use cursor control to select				Quit
Press OK or — to invoke item			Use cursor control to select
Press MENU to exit menu			Press OK or — to accept

6.Press OK (–/––) to activate the STORE item.

7.Use Cursor Control to select P. PREF 1, 2 or 3 in the action window.

Note: If you select Quit, you will exit the action window and your settings will not be stored in the P. Pref. memory.

8.Press OK (–/––) to confirm and store the new Personal Preferences.

9.If required, select another item you wish to adjust or press MENU to exit.

Resetting to the factory set default settings

1.Select the required input (Video, S-video, Data).

2.Press MENU.

–The menu bar appears on the screen.

3.Use Cursor Control to select P. PREF (Personal Preferences) in the menu bar.

4.Use Cursor Control to select RESET from the submenu.

Audio	Source	P . Pref .	Audio	Source	P . Pref .
		Recall			Recall
		Store			Store
		Reset			Reset
Use cursor control to select				Reset Quit
Press OK or — to invoke item			Use cursor control to select
Press MENU to exit menu			Press OK or — to accept

5.Press OK (–/––) to activate the RESET item.

6.Use Cursor Control to select RESET if you wish to reset your Personal Preferences for the selected source to the factory set default settings.

7.Press OK (–/––) to confirm and store the factory set default settings.

8.If required, select another item you wish to adjust or press MENU to exit.

If you wish to keep the old settings after all:

1. Use Cursor Control to select
	QUIT in the action window.	Audio	Source	P . Pref .
				Recall
2.	Press OK (–/––) to confirm.			Store
				Reset
3.	If required, select another item
	you wish to adjust or press
	MENU to exit.

Reset Quit

Use cursor control to select

Press OK or — to accept

OTHER SETTINGS

Default source selection

The Auto start command gives you the opportunity to define the input source with which your projector will start up.

For instance: if you select Video as your default (Auto start) source, the projector will select Video as the source when the projector is switched on.

Note: The factory set default for Auto start is Data.

1.Press MENU.

–The menu bar appears on the screen.

2.Use Cursor Control to select SOURCE in the menu bar.

3.	Use Cursor Control to select
		D i s p l a y Audio	S o u r c e
	AUTO START from the sub		D a t a
	menu.		V i d e o
			S - V i d e o
4.	Press OK (–/––) to activate		√Auto start
	the AUTO START item.

5.Use Cursor Control to select

the required default source in the action window (Data, Video or S-Video).

6.Press OK (–/––) to confirm and store the default source.

7.If required, select another item you wish to adjust or press MENU to exit.

English

17