Philips LC4043 Operation, English, Video system selection, Audio Control, Personal Preferences

A/V mute

8. OPERATION Picture control/Audio control/Personal Preferences

English

6.Press OK (–/––) to confirm and store the adjustment.

7.If required, select the next item to be adjusted or press MENU to exit.

Notes:

–When you have selected the menu mode, you cannot use the source selection buttons on the projector or on the remote control to select another input. You can only change to another input via the SOURCE menu.

– A(audio)/V(video)-mutecan only be selected with the A/V MUTE button on the projector or on the remote control.

A/V mute then appears on the screen.

Video system selection

The Projector is equipped with full NTSC, PAL and SECAM video support. When set to AUTO, the broadcast format is automatically switched according to the video standard connected. If you experience poor colour however, you may have to set to NTSC, PAL, or SECAM as described below.

1.Press VIDEO to select video signal or S-video signal as the current projection source.

The button toggles between video and S-video signal.

–VIDEO or S-VIDEO appears on the screen.

Video S - Video

2.Press MENU.

–The menu bar appears on the screen.

3.Use Cursor Control to select SOURCE in the menu bar.

4.	Use Cursor Control to select
			Display	Audio	Source
	VIDEO or S-VIDEO from the sub				Data
	menu.				√Video
					S - Video
5.	Press OK (–/––) to activate the				Auto start
	VIDEO or S-VIDEO item.
6.	Use Cursor Control to select the
	required video system in the	AUTO PALBG		PALM PALN NTSCM
			NTSC443 SECAM50		SECAM60
	action window: AUTO, PAL,		Use cursor control to select
	SECAM or NTSC.		Press OK or — to accept

7.Press OK (–/––) to confirm and store the selected video system.

8.If required, select another item you wish to adjust or press MENU to exit.

AUDIO CONTROL

The projector’s sound is set to standard specifications at the factory. However, you can adjust the sound to suit your own preferences by using the SOUND CONTROL feature.

The following adjustments can be made:

–volume – adjusts the sound level;

–bass – adjusts the bass tones;

–treble – adjusts the high tones;

–mute – mutes the sound of the projector (or an externally connected loudspeaker);

1.Select the required input (Video, S-Video or Data).

2.Press MENU.

–The menu bar appears on the screen.

3.Use Cursor Control to select AUDIO in the menu bar.

4.Use Cursor Control to select the item to be adjusted.

			Display	Audio	Source
Display	Audio	Source
	Volume			Volume
				Bass
	Bass
				Treble
	Treble
				√Mute
	Mute
Use cursor control to select				On Off
			Use cursor control to select
Press OK or — to invoke item
			Press OK or — to accept
Press MENU to exit menu

5.Press OK (–/––) to activate the selected item.

6.Use Cursor Control to make the required adjustment in the action window.

7.Press OK (–/––) to confirm and store the adjustment.

8.If required, select the next item to be adjusted or press MENU to exit.

Notes:

–The volume can also be adjusted with the – VOLUME + buttons on the projector or on the remote control.

–When the projector is connected to an amplifier or stereo system, the volume must be adjusted on the amplifier or stereo system.

–Mute can also be selected with the MUTE button on the projector or on the remote control.

Mute then appears on the screen.

–A(audio)/V(ideo)-mutecan only be selected with the A/V MUTE button on the projector or on the remote control. A/V mute then appears on the screen.

	A/V mute
Mute

PERSONAL PREFERENCES

You can store up to three sets of settings. These settings can be called up at any time so you can use different sets of settings for different sources.

The following settings can be stored:

– vertical mirror	– audio volume
– bass	– horizontal mirror
– treble	– brightness
– white point	– contrast
– hue	– saturation

–AV source (Data/Video/S-Video)

Storing Personal Preferences

1.Select the required input (Video, S-Video or Data).

2.Make the required adjustments, as described under ‘Picture Control’ and ‘Audio Control’.

3.Press MENU.

–The menu bar appears on the screen.

4.Use Cursor Control to select P. PREF (Personal Preferences) in the menu bar.

5.Use Cursor Control to select STORE from the submenu.

16