Introduction and General Information
E n g l i s h
Features
Your complete
Features include:
Use the Home Cinema Audio System for a
Additional Equipment Connections
Connect other audio and audio/visual equipments to the DVD system so you can use the system’s surround sound speakers.
Parental Level (only available in region 1 player)
Set a ratings level so your children cannot watch a DVD that has a rating higher than you set.
Supplied accessories
–a remote control with two AA batteries
–an AM loop antenna and an FM wire antenna
–an audio cable, Pr/Cr Pb/Cb Y video cable,
–four satellite speakers and one center speaker, including five speaker cables
–an active subwoofer, including a connection cable and a power cable
–a power cable for connection with the main unit
–five speaker brackets and five screws.
–four mini speaker stands and eight screws (for model
–one pair of speaker stands (for model
–this instruction booklet
If any item is damaged or missing, contact your retailer or Philips.
Child Lock
Block specific DVDs from playing, regardless of how you set the Parental Level.
Sleep Timer
Enable the system to switch to standby mode automatically at a preset time.
Plug and Play
Store all available radio stations automatically when you turn on the power.
Progressive Scan (for LX8000SA model only)
Provides a
Discs for playback
Your DVD system is able to play :
–All
–All finalized audio CDR and audio CDRW discs
–All Video CDs, Super Video CDs, Super Audio CDs, and DVDs
–
Player zone
DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc is the same zone as your player.
The region code for this DVD system is 1. | 1 |
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Installation
●Place the system on a flat, hard, and stable surface.
●There must be sufficient room in front of the system for the drawer to open.
●In a cabinet, allows about 10cm (4 inches) of free space all around the system for adequate ventilation.
●Do not expose your system to extreme temperatures or humidity.
Maintenance
●When a disc becomes dirty, clean it with a
cleaning cloth. Wipe the disc from the center out, in a straight line.
● Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or
direct sunlight). Always keep the disc tray closed to avoid dust on the lens.
●Do not use solvents such as benzene, thinner, commercially available cleaners, or
●The lens may cloud over when the system is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the system in the warm environment until the moisture evaporates.
6INTRODUCTION AND GENERAL INFORMATION