| Installation |
| English |
| R |
AC power cord |
|
Speaker | Speaker |
(right) | (left) |
| FM wire antenna |
IMPORTANT!
–The type plate is located at the rear of the system.
–The voltage selector located at the bottom of the subwoofer is preset at
–Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
–Never make or change any connections with the power switched on.
–High voltage! Do not open.You run the risk of getting an electric shock.
–The machine does not contain any
–Modification of the product could result in hazardous radiation of EMC or other unsafe operation.
To avoid overheating of the system, a safety circuit has been built in.Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it (not available for all versions).
Note:
–Before installation is finished, it is not recommended to remove the protective plastic film attached to the surface of the front panel to avoid any scratch caused during installation.
11
