English

Installation

 

Step 1: Connecting speakers

Step 2: FM antenna connection

 

Connect the supplied FM antenna to the FM

 

AERIAL terminal. Fully extend and adjust the

 

position of the antenna for optimal reception.

1Place the main set with the front side facing down on a flat and firm surface.Then remove the detachable cover on the back of the set to expose the terminals available for connection.

2Connect the two front speaker cables to the SPEAKER OUT terminals: right speaker to "R" and left speaker to "L".

3Connect one end of the 15-pin D-Sub cable (the other end is fixed on the CONNECT TO SUBWOOFER terminal on the back of the main set) to the CONNECT TO MAIN terminal of the subwoofer by matching the pins. Fix the two screws on the connectors to ensure firm connection.

Notes:

Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

For optimal sound performance, use the supplied speakers.

Do not connect more than one speaker to any one pair of +/- speaker terminals.

Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

The delivery-attached 15-pin D-Sub cable is intended for use with this system only. Never try it on any other devices (e.g., do not use it in connection of your PC).

For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal.

Notes:

– This system does not support MW reception.

12

Page 12
Image 12
Philips MCD288/05 Connecting speakers FM antenna connection, For optimal sound performance, use the supplied speakers