Radio Reception
English |
Tuning to radio stations
Manual programming
1Press SOURCE on the set repeatedly or TUNER on the remote to select FM tuner source.
2Press and hold TUNING 22/33 (2/3 on the remote) and release the button.
➜ The radio automatically tunes to a station with sufficient reception.
3Repeat step 2 if necessary until you find the desired station.
●To tune to a weak station, press TUNING 22/33 (2/3 on the remote) briefly and repeatedly until you have found optimal reception.
1Tune to your desired station (refer to “Tuning to radio stations”).
2Press PROGRAM to activate programming. ➜ PROG flashes on the display.
3Press PRESETí/ë to allocate a number from 1 to 20 to this station.
4Press PROGRAM again to confirm the setting. ➜ PROG disappears.
5Repeat the above four steps to store other stations.
●You can override a preset station by storing another frequency in its place.
Programming radio stations
You can store up to a total of 20 FM radio stations in the memory.
Automatic programming
Press PROGRAM for more than three seconds to activate programming.
➜All available stations are programmed.
➜AUTO is displayed and available stations are programmed in order of waveband.
Tuning to preset radio stations
●Press PRESETí/ë until the desired preset station is displayed.
34
