Philips MCD300/93 Audio Setup, Spdif Setup default SPDIF/RAW, Dolby Digital Setup, 3D Processing

System Menu Options

Audio Setup Page

The options included in Audio Setup page are: “SPDIF Setup”,“Dolby Digital Setup”, “3D Processing”,“HDCD” and “Post DRC”.

SPDIF Setup (default: SPDIF/RAW)

The options included in SPDIF (Sony/Phillips Digital Interface Format) Setup Page are: “SPDIF Off”,“SPDIF/Raw” and “SPDIF/PCM”.

➜SPDIF Off:Turns off the SPDIF output.

➜SPDIF/Raw: If you have connected your DIGITAL OUT (COAXIAL or OPTICAL) to a multi-channel decoder/receiver.

➜SPDIF/PCM: Only if your receiver is not capable of decoding multi-channel audio.

Dolby Digital Setup

The options included in Dolby Digital Setup are: “Dual Mono” and “Dynamic”.

Dual Mono (default: stereo)

➜Stereo: Left mono sound will send output signals to Left speaker and Right mono sound will send output signals to Right speaker.

➜L-Mono: Left mono sound will send output signals to Left speaker and Right speaker.

➜R-Mono: Right mono sound will send output signals to Left speaker and Right speaker.

Dynamic (default: Off)

Optimise the dynamic sound output. High volume outputs are softened, enabling you to watch your favourite movie without disturbing others.

➜The levels for dynamic selection: FULL, 3/4, 1/2, 1/4 and OFF.

Note:

–DTS surround audio output is not available in this DVD player.

3D Processing

The option included in 3D Processing is: “Reverb Mode”.

Reverb Mode (default: Off)

Reverb mode provides a virtual surround sound experience using just two speakers.

➜Off, Concert, Living Room, Hall, Bathroom, Cave, Arena and Church.

English

Select the setting that matches the number of speakers you have connected.

61