System Menu Options
English
HDCD
The option included in HDCD (High Definition Compatible Digital) is: “Filter”.
Filter (default: Off)
Sets the audio output cutoff frequency point when playing an HDCD disc.
➜Off, 44.1K and 88.2K.
Post DRC (default: On)
Switches on/off analogue sound dynamic range compression.
➜On: Audio with fully compressed dynamic range.
➜Off: Audio with uncompressed dynamic range.
Video Setup Page
The options included in Video Setup page are: “Component”,“TV Mode” and “Quality”.
Component
Sets the video output according to your video connection.This setting is not required if you are using the VIDEO jack (yellow) to connect the DVD micro system to your TV.
➜Pr/Cr Pb/CbY: Select this if you have connected the DVD micro system to your TV using Component video jacks.
➜
TV Mode (default: Interface)
Selects interlace or
➜P-SCAN and Interlace.
In the progressive scan mode, you can enjoy the high quality picture with less flickers. It only works when you have connected the DVD player's Y Pb Pr jacks to your TV that supports the progressive video input. Otherwise, a distorted picture will appear on the TV. For proper progressive scan set up, see page
Quality
This menu helps you to set the video quality.
1Press 3 4 to highlight “Quality”.
2Press 2 or OK to enter Video Quality Setup.
The options included in Video Quality Setup page are: “Sharpness”, “Brightness”, “Contrast”, “Gamma”, “Hue”,“Saturation” and “Luma Delay”.
Sharpness
Adjusts the sharpness level.
➜High, Medium and Low.
Brightness
Adjusts the brightness level. Range:
Contrast
Adjusts the contrast level. Range:
Gamma
Adjusts the gamma level.
➜High, Medium, Low and None.
Hue
Adjusts the hue level. Range:
Saturation
Adjusts the saturation level. Range:
Luma Delay
Adjusts the luma delay.
➜0 T and 1 T.
62
