Philips NP3900/12 user manual Wired connection

Consult the user manual of the router.

Or, to check for the settings of the router, enter the IP address (e.g. 192.168.1.1) in the web browser (e.g. Internet Explorer) of the computer, and then, get the desired information in the setup page.

Enter the IP address manually

On the NP3900, enter an IP address that allows the unit to be in the same subnet as the router.

For example, if the router has

IP address: 192.168.1.1, Subnet mask: 255.255.255.000;

Then, enter the following on the unit: IP address: 192.168.1.XX (where XX denotes a number), Subnet mask:

255.255.255.000.

Press / repeatedly to select the entry location;

To enter the desired digits, use the alphanumeric buttons on the remote control; or press / repeatedly.

Note

Ensure that you never enter an IP address that is already assigned to a computer/device on the network.

Wired connection

NP3900

Connect to the router by using the Ethernet cable

1Select [Yes], when asked whether to set up network connection (see ‘First-time setup’).

2Use an Ethernet cable to connect the unit to the router.

12V=1A To Modem LAN4 LAN3 LAN2 LAN1 Reset

Connect to the home Wi-Fi/wired network

On the unit, select [Wired (Ethernet)].

»The unit starts to acquire an IP address assigned by the network automatically.

»A message appears when the connection is completed successfully.

EN 21