2/2

Wireless (WiFi)

Wired (Ethernet)

Tip

The router may fail to assign an IP address,

Protocol) is unavailable or disabled on the router. You may need to enter the IP address manually, or press BACK to start re- connecting.

Connect to the Internet

Connect to the Internet as prompted.

»

time setup is complete.

NP3900

Internet

Note

Ensure that the router connects to the Internet directly and no dial-up is required on the computer.

22EN

Wired connection: Enter IP address manually

NP3900

Stop getting Auto IP

1Use an Ethernet cable to connect the unit to the router.

2On the unit, select [Wired (Ethernet)].

3Press BACK on the remote control to stop getting auto IP.

Acquiring IP address...

Press <Back> to enter

IP address manually

Get the IP address of the router

Consult the user manual of the router.

Or, to check for the settings of the router, enter the IP address (e.g. 192.168.1.1) in

Page 21
Image 21
Philips NP3900/12 user manual Wireless WiFi Wired Ethernet, Wired connection Enter IP address manually