Philips s10, S10A user manual Baby monitor, Activate/Deactivate the baby unit, Send an alert

23 Baby monitor

Your phone can act as a baby monitor and send an alert if the sound level exceeds a pre-set limit. For this, it needs to be placed as a "baby unit" within the baby's room.

Caution

•• Make sure the baby unit and the cord are always out of reach of the baby.

•• Place the baby unit at least 1 meter/3 feet but not more than 2 meters/6 feet away from the baby.

1-2m

Activate/Deactivate the baby unit

1	Tap	from the main menu screen.
2	Select [Activate] to activate the baby unit.

Tap [Stop] to deactivate it.

Tip

•• If you try to activate the baby monitor function, without having specified where an alert should be sent to, then you will be asked to select to where you send the alert: external lines or other handset number. For information, see the next section.

Note

•• When the baby monitor mode is activated, the baby handset does not ring on incoming calls.

Send an alert

You can send an alert to other handsets within the home or an external line. External line can be a mobile phone or another fixed line outside the house.

Note

•• Make sure that any prefix digits and/or country code are included when you send an alert.

Send alert to other handsets

1 Tap from the main menu screen. 2 Select [Send alert] > [Intercom].

3 Select the handset number.

Note

•• Make sure that the distance between the baby unit and the parent unit is at least 1.5 meter away from each other to prevent the howling effect.

1.5m

Send alert to an external line

1 Tap from the main menu screen.

2 Select [Send alert] > [External line].

3 Enter a telephone number, then tap [Set].

Note

•• You can still send an alert to the external line even though it is in the barred list.

48EN