Philips S10A, s10 user manual Handset does not ring

Models: s10 S10A

1 62
Download 62 pages 6.28 Kb
Page 57
Image 57

I cannot change the settings of my voice mail, what do I do?

The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings.

The handset is docked, but does not charge.

•• Make sure the battery is inserted correctly.

•• Make sure the handset is placed properly on the charger.The battery icon animates when charging.

•• Make sure the docking tone setting is turned on. When the handset is placed correctly on the charger, you can hear a docking tone.

•• The charging contacts are dirty. Disconnect the power supply first and clean the contacts with a damp cloth.

•• Batteries are defective. Purchase new ones with the same specifications.You can order replacement batteries through www.philips.com or the Philips Service organization.

No display

•• Make sure the battery is charged.

•• Make sure there is power and the phone is connected.

Bad audio (crackles, echo, etc.)

•• The handset is nearly out of range. Move it closer to the base station.

•• The phone receives interference from the nearby electrical appliances. Move the base station away from them.

•• The phone is at a location with thick walls. Move the base away from them.

The handset does not ring.

Make sure the handset ringtone is turned on. The caller ID does not display.

•• The service is not activated. Check with your service provider.

•• The caller's information is withheld or unavailable.

The caller ID is not displayed.

The service is not activated. Check with your service provider.The caller’s information is withheld or unavailable.

Note

•• If the above solutions do not help, disconnect the power supply from both the handset and base station. Try again after 1 minute.

EN 55

Page 57
Image 57
Philips S10A, s10 user manual Handset does not ring