Select the recall duration
Make sure that the recall time is set correctly before you can answer a second call. In normal case, the phone is already preset for the recall duration.You can select among 3 options:
[Short], [Medium] and [Long].The number of
available options varies with different countries. | ||
For details, consult your service provider. | ||
1 | Tap | from the main menu screen. |
2 | Select [Call settings] > [Recall time]. | |
3 | Select an option. | |
»»The setting is saved.
First ring
If you have subscribed to the caller ID service with your service provider, your phone can cancel the first ring before the caller ID is displayed on the screen. After the phone is reset, it can detect automatically if there is a
caller subscription and start to cancel the first ring.You can change this setting to suit your
preference.This feature only applies to models | |
with first ring support. | |
Turn the first ring on/off | |
1 | Tap from the main menu screen. |
2 | Select [Call settings] > [First ring]. |
3 | Select [On]/[Off]. |
»»The setting is saved.
Note
•• To reset the first ring status, go to the reset menu (see 'Restore default settings' on page 34).
Auto clock
Note
•• This service is network dependent.
•• Make sure you have subscribed to the caller ID service before you use this feature.
It synchronizes the date and time on your phone with the public switched telephone network (PSTN) automatically. For the date to be synchronized, make sure the current year is set.
1 | Tap from the main menu screen. |
2 | Select [Call settings] > [Auto clock] |
3 | Select [On]/[Off]. |
»»The setting is saved.
Dial mode
Note
•• This feature is country dependent and only applies to models that support both tone and pulse dial.
Dial mode is the telephone signal used in your country.The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider | |
for detailed information. | |
1 | Tap from the main menu screen. |
2 | Select [Call settings] > [Dial mode]. |
3 | Select an option, then tap [OK] to confirm. |
»»The setting is saved.
Line settings
You can select whether to use the landline or a
connected mobile phone as the default line for | |
outgoing calls. | |
1 | Tap from the main menu screen. |
2 | Select [Call settings] > [Line settings]. |
3 | Select a new setting. |
»»The setting is saved.
Tip
•• You can select from [Home]/[Manual] or one of the mobile lines for an outgoing call. If a mobile line is selected and it is busy, [Home] will be selected automatically.
•• An idle line means a phone line is not busy at the moment.
36EN
