12.5.1 Activating/deactivating call barring
1 Press m.
2 Select ADVANCED SET > CALL BARRING. Press OK.
3 Enter the system PIN. Press OK.
4 Select MODE. Press OK.
5 Select the new setting. Go to step 6 if you selected ON or step 7 if you selected OFF.
6 Enter the barred number (if it is not set previously).
7 Press OK.
• The setting is saved.
12.5.2Setting barred numbers You can set up to 4 numbers of 1 - 4 digits long. Outgoing calls starting with one of the 4 programmed numbers will be
blocked from dialing out.
1 Press m.
2 Select ADVANCED SET > CALL
BARRING. Press OK.
3 Enter the system PIN. Press OK.
4 Select NUMBER > NUMBER 1 (2, 3,
4). Press OK.
5 Enter the number you want to block. Press OK.
• The setting is saved.
12.6Area code management
This feature only applies to model(s) with area code support.
This feature automatically removes the area code of an incoming call. You can define an area code (up to 6 digits) you want to remove. The phone number will be saved in the call log without the area code.
Calling Features
12.6.1 Activating area code removal
1Press
2Select ADVANCED SET > AREA CODE. Press OK.
3Enter the area code. Press OK.
• The setting is saved.m.
12.6.2 Deactivating area code removal
1Press
2Select ADVANCED SET > AREA CODE. Press OK.
3Use BACK to delete all the digits. Press OK.
• The setting is saved.
12.7Auto prefixm.
The auto prefix feature checks and formats your outgoing call number before it is dialed out. If the first few digits of the number match the detect number you set in the menu, they will be replaced by the prefix number you set in the menu.
For example, you set the detect number as 604 and prefix number as 1250. When you have dialed out a number such as 6043338888, your phone will change the number to 12503338888 when it dials out.
Note
The maximum length of detect digits is 5 digits. The maximum length of auto prefix number is 10 digits.
1Press m.
2Select ADVANCED SET > AUTO PREFIX. Press OK.
3Enter the Detect number. Press OK.
37
