Philips SHC2000 manual Audio Connections, Basic operation, English

Models: SHC2000

1 114
Download 114 pages 27.15 Kb
Page 7
Image 7
Audio Connections

SHC2000_booklet 12-01-2006 11:05 Pagina 7

Audio Connections

Audio Connections

Connecting the IR transmitter to a headphone output of an audio source (figure 5)

1Connect the 3.5mm stereo plug of the stereo audio cable to the headphone output of an audio source, such as TV, HiFi or PC.

In case your audio source has a 6.3mm headphone output, use the supplied 3.5mm to 6.3 mm stereo adapter plug.

2Switch on your audio source and carefully increase the volume of the audio source.

3Switch on the headphone.

4Adjust the volume to the desired level with the headphone volume control.

Basic operation

When the IR transmitter is connected to a headphone output of an audio source.

1Switch on your IR transmitter and place it at the same height or slightly higher than the reception height of the IR headphone.

2Position the LED’s towards the listening area, ensuring that there are no obstacles in between transmitter and headphone.

3Switch on the headphone.

4Switch on your audio source and carefully increase the volume of the audio source.

5Adjust the volume of the IR headphone to the desired level with the headphone volume control.

IMPORTANT

Because IR light travels in a straight line, place the IR transmitter at the same height, or slightly higher than the reception height of the IR headphone.

High IR light content such as sunlight and bright incandescent indoor lighting may degrade the audio signal and cause interference. If you experience such problems, simply move the system to a darker area.

English

7

Page 7
Image 7
Philips SHC2000 manual Audio Connections, Basic operation, English