ENInstall
In the following installation procedure the assumption is made that you already installed a Wireless Network with a Philips Wireless Base Station (SNB6500 or SNB6520). Installing this WRE as an addition to another Wireless network brand/type, having WDS support, is possible but
Powering up the Wireless Range Extender (WRE) and connecting the cables
Connect power to the Wireless Range Extender
Make sure the switch is set on the correct mode.
RP: Repeater mode (Default),
EC: Ethernet Client mode,
AP: Access Point
5V=1A TO Modem/PC AP EC RP
Make sure the detachable antenna is mounted on the connector on the right hand side.
Put the antenna in the
5V=1A TO Modem/PC AP EC RP
Take the supplied 5V |
| 1A power adapter |
|
|
|
|
| ||
Connect the supplied power adapter to the 5V |
| 1A port. | ||
| ||||
5V=1A TO Modem/PC AP EC RP
Connect power adapter to power socket.
Power light should be on.
The WRE is now starting up and it will take approximately 1 minute to be ready for configuration(Wireless light is on). In the meantime you can proceed with the next steps.
Wireless Base Station 11g True Turbo
Wireless Modem/PC Power
8
