Configuring Client PC | EN |
|
|
After completing hardware setup by connecting all your network devices, you need to configure your computer to connect to the ADSL Wireless Base Station.
See: ‘Windows 2000’ ‘Windows XP’ ‘Wireless adapters’
TCP/IP Configuration
To access the Internet through the ADSL Wireless Base Station, you must configure the network settings of the computers on your LAN to use the same IP subnet as the Wireless Base Station. The default IP settings for the Wireless Base Station are:
IP Address | 192.168.1.3 |
Subnet Mask | 255.255.255.0 |
DHCP function | Enable |
DHCP IP Pool Range | 192.168.1.2 to 192.168.1.254 |
Note: These settings can be changed to fit your network requirements, but you must first configure at least one computer to access the Wireless Base Station's web configuration interface in order to make the required changes. (See ‘Configuring the Wireless Base Station’ on page 10 for instruction on configuring the Wireless Base Station.)
Windows NT 4.0
1On the Windows desktop, click Start/Settings/Control Panel.
2
3In the Network window, select the Protocols tab.
4When the Microsoft TCP/IP Properties window opens, select the IP Address tab.
27
