Philips SRM 5100 user manual Restoring the original functions of your remote control

SRM5100_Def 31-05-2007 16:43 Pagina 11

Instructions for use

Example: In STB mode you want to operate the amplifier/receiver volume control

1 Keep keys 1 and 6 on the SRM 5100 pressed simultaneously for three seconds, until the STB LED flashes twice and then remains lit.

2 Press keys 9, 9 and 3 in that order.

– The STB LED flashes twice and then remains lit.

3Press the MODE key to select STB. Press the key until the STB LED lights up.

English

4 Press the OK key.

5Press the MODE key to select AMP.

Press the key until the AMP LED lights up.

6 Press the OK key.

–The AMP LED flashes twice to confirm the

new setup. You can now use the AMP volume controls in STB mode.

Restoring the original functions of your remote control

1 Keep keys 1 and 6 on the SRM 5100 pressed simultaneously for three seconds, until one of the LEDs (PC,TV, STB, AMP) lights up.

2 Press keys 9, 8 and 1, in that order.

– The LED flashes twice. All original functions have now been restored and any extra functions have been deleted.

11