Philips SRM 5100 Instructions for use Contents, Introduction, Installing the remote control

SRM5100_Def 31-05-2007 16:43 Pagina 4

English

Instructions for use
	Contents
1.	Introduction	. . . . . . 4
2.	Installing the remote control	. . . . 4-7
	Connecting the receiver (for PC only)	. . . . . . 4
	Inserting the batteries in the remote control	. . . . . . 4
	Testing the remote control	. . . . . . 5
	Setting the remote control	. . . . 5-7
3.	Keys and functions	. . . . 8-9
4.	Extra possibilities	. . . 9-10
	Learn a key	. . . . . . 9
	Adding a function to the remote control	. . . . . 10
	Assigning the volume control to another mode	. . 10-11
	Restoring the original functions of your remote control	. . . . . 11
5.	Troubleshooting	. . 12-13
6.	Need help?	. . . . . 13
	Code list of all brands / equipment	124-137
	Information to the consumer	. . . . 139

1. Introduction

Congratulations on your purchase of the Philips SRM 5100 universal remote control. After installing the remote control you can operate a maximum of

4different devices with it: Windows Vista™ based PC,TV (TV, LCD TV, plasma TV, projector, HD TV), STB (Set Top Box, satellite or cable decoder, digital terrestrial receiver / decoder) and AMP (amplifier, receiver, Home Theatre System).You can find information about how to prepare this remote control for use in the chapter ‘Installing the remote control’.

2. Installing the remote control

Connecting the receiver (for PC only)

•	Plug the receiver USB connector into one
	of the PC’s / laptop’s USB ports.
–	A green LED lights up, indicating that the
	receiver is deriving its power from the PC /
	laptop.
–	A red LED lights up. The PC / laptop is now
	looking for the driver. As soon as the driver is
	found the red LED goes out. The receiver is
	now ready for use.

Inserting the batteries in the remote control

1Press the cover inwards and slide it in

the direction of the arrow.

2Place two AAA type batteries into the battery

compartment as shown.

3 Slide the cover back and click it firmly into place.

Note: If, after every key press, all indicator LEDs (PC, TV, STB and AMP) light up and then go out one after another, the remote control is indicating that its batteries are running low. Replace the batteries.

4