Philips SRU5030/55 owner manual Button Functions, cont

Button Functions

Button Functions, cont.

		1.	Red Indicator: Lights when any button is pressed.
1.	19.	2.	TV, VCR/DVD, CBL: Selects product to be
			operated.
		3.	NUMBERS: Enter numbers for direct channel
2.	18.		selection. Some products require Enter to be
			pressed after channel selection.
3.	17.	4.	ENTER: Used after direct channel number entry to
			immediately change to the selected channel.
4.	16.	5.	QUIT: Used to exit menu functions.
		6.	MENU: brings up the DVD disc Menu screen - use
5.	15.		with the UP, DOWN, LEFT & RIGHT navigation
			buttons.
		7.	VOLUME UP/DOWN: Changes the volume level of
6.	14.	8.	the product, normally the TV.
			SLEEP: Turns off the TV after a period of 1 to 99
7.	13.		minutes.
		9.	MUTE: Turns off the TV sound while the picture
8.	12.		remains.
		10.	RECORD, PLAY, STOP, REW, FF, PAUSE: VCR
			control buttons operate your VCR even when the
9.	11.		remote is set to operate the TV. Also operates DVD
			Scan -/+.
10.		11.	PREV. CHAN: Returns to the previously selected
			channel, or DVD repeat toggle.
		12.	CC (SUBTITLE): TV Closed Caption (if your TV
			has this feature) or DVD Subtitle toggle.
		13. OK: Selects menu items for the device you are
			controlling.
		14.	CHANNEL UP/DOWN: Changes the channels.
			CHAPTER +/-:controls DVD/CD track selection i.e.
			DVD/CD Track Skip Up/Down (in DVD and SAT
			modes). Note the VCR buttons also control DVD
			when in DVD Mode.
Note: The REC button must be pressed TWICE to		15.	UP, DOWN, LEFT & RIGHT: navigation buttons.
		16.	INFO/SELECT: Displays/selects on-screen channel
record from your VCR. For some brands of VCRs, you
			information, etc.
might need to press the REC button once, then press it
		17.	TV/VCR/INPUT: For some TVs, press repeatedly to
again for three seconds.
			select from available viewing sources (antenna,
Some buttons on the remote might have functions that			cable box, VCR, etc.).
		18.	SETUP: Used for setup.
are referred to by different names on the device you are
		19.	POWER: Turns product On or Off.
controlling. E.G. PREV.CHAN may be called RECALL, or
ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have PREV.CHAN
ability for the PREV.CHAN button to operate this
feature.
32			33