Conformity, Environment and Safety

Safety information :This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

Conformity : Hereby, Philips declares that the products Zenia 300 (TU7371,TU7372 & TU7370) are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Should you need a copy of the original certificate, please contact the Philips customer care center.This product can only be connected to the analogue telephone network in the area which is indicated on the label placed under the base station.

Power requirements : This product requires an electrical supply of 220-240 volts, alternating monophased power, excluding IT installations defined in standard EN 60-950.

Warning ! The electrical network is classified as dangerous according to criteria in the standard EN 60-

950.The only way to power down this product is to unplug the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible. Telephone connection : The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard EN 60-950).

Safety precautions : Do not allow the handset to come into contact with water. Do not open the handset or the base station.You could be exposed to high voltages. Do not allow the charging contacts or the battery to come into contact with conductive materials.

Environmental care : Please remember to observe the local regulations regarding the disposal of your packaging materials, exhausted batteries and old phone and where possible promote their recycling.

Declaration of conformity

We,

Philips Consumer Electronics DECT & Home Telephony Route d’Angers

72081 Le Mans Cedex France

Declare that the products Zenia 300, Zenia 300 additional handset and all bundle combinations are in compliance with the annex III of the R&TTE-Directive 1999/5/EC and then with the following essential requirements :

Article 3.1.a (protection of the health & the safety of the user) : EN 60950 (2000)

Article 3.1.b : (protection requirements with respect to the electromagnetic compatibility ) : ETSI EN 301 489-6 VI.I.I (09/2000) & ETSI EN 301 489-1 VI.3.1 (09/2001)

Article 3.2 (effective use of the radio spectrum) EN 301 406 (2001)

The presumption of conformity with essential requirements regarding Council directive 1999/5/EC is ensured.

Date : 16/07/2003

Vice President & General Manager. DECT & Home Telephony

42

Certificate of conformity

Page 43
Image 43
Philips SS071P manual