Philips SS071P manual Installing the base station, Installing and replacing the battery pack

Models: SS071P

1 46
Download 46 pages 560 b
Page 7
Image 7

Installing the base station

To properly install the base station, plug the line cord and the power cable into the base station. Plug the cord and the cable into the wall socket.The green indicator on the base station indicates that the phone is properly installed.

Warning ! The electrical network is classified as dangerous according to criteria in the standard EN 60-950.The only way to power down this product is to unplug the power supply from the electrical outlet. Ensure the electrical outlet is located close to the apparatus and is always easily accessible.

Warning : Always use the cables provided with the product.

! Do not insert anything in this opening

Installing and replacing the battery pack

To insert the battery pack, open the battery door on the handset by sliding it down. Connect the battery pack to the connector inside the handset.

Place the battery with sticker face up .

! When replacing the battery pack, only use Philips rechargeable battery packs NiMh 2HR AAA 600mAh.

Batteries should not be disposed of with general household waste.

Battery life and range

The battery life is about 250 hours in stand by time (when the handset is in idle mode & ready to receive a call) and around 16 hours in communication. A low battery alert will inform you that the handset has to be charged. If this is during a call, the call will end shortly after the alert.

Optimal battery life is reached after 3 cycles of full charge/discharge.

Under ideal conditions the range is a maximum of 50 meters indoors and 300 meters outdoors.When reaching the range limit, the conversation will become crackly, move closer to the base station otherwise the call will be cut off.To reach optimal range place the base station away from electrical appliances.

Connecting the base and the charger

The Zenia 300 Vox handset charger is separate from the base so that it can be located in the most convenient place regard- less of the position of the telephone line connection. However, the handset charger is delivered with an accessory that can be used for linking together the base and the charger.They form thus a single aesthetically pleasing unit.This accessory is located under the charger. It can be fitted as shown on the picture. If not in use, it can be conveniently stored under the charger.

6

Installing the phone

Page 7
Image 7
Philips SS071P manual Installing the base station, Installing and replacing the battery pack, Battery life and range