Basic use of the base stationIn-call features on the base station
Connect the line and dial from the base station keypad

Making a call from the base

Press and then
When the phone rings, press to answer the call.Press again to end the call.
Redial(Redial last number called from the base)

Answering/ending a call on the base

To activate/deactivate the Do Not Disturb mode from the base

During an external call, you can access from the base to additional features.
To mute the base microphone when on line
1- Press
The caller can no longer hear you, but you can hear him.
To resume the conversation press again .
Call transfer from the base
During an external call, you can transfer the call to handset from the base station
1- Press
2- The caller hears music (if music on hold is activated)
3- All the handsets ring
4- Answer the call on any handset.
The caller is directly transfered to the handset
If no handset answers,after a while the base will ring again, resume the call on the base by pressing
again.
To record a memo on the base in idle mode
To start recording press ,speak close to the base and press again (see page 26).
To record a conversation on the base when on line
To start recording press ,press again to stop recording (see page 11).
The call is recorded on the answer machine for a maximum of 6 mins.It automatically stops if the answer
machine gets full.
Press to activate/deactivate this mode with your own settings (see page 37).
Use of the base station 7
zenia300UK_coorections_indice2.qxd 26/09/03 10:56 Page 7