Specifications, General | Photogenic Professional Lighting PM800R, PM400R

SPECIFICATIONS

Flash Power….........................................……….. 12.5 to 400 watt-seconds.

Maximum (6 f-stops) Flash Duration….........................................…….. 1/1625 second at Full

1/800 second at 1/32

Reciprocity……………………………………….Excellent, no filters required

Recycling time…..........................................……. 0.5 to 1.5 seconds @ full

Power Control…............................................…… Full to 1/32 range.

(6 f-stops)

0.1 f-stop resolution.

Modeling Light Power ................................…… . 100 Watt Quartz, ESR

Modeling Light Control ...............................…… Full to 1/32 range.

0.1 f-stop resolution. Line voltage regulated.

Triggering ....................................................……. Built in Photoslave.

Push to Test button. Synchronization Jack.

12 volt isolated.

Main Supply …………..……………………….. 90-250 VAC, 50/60 Hz, 3.5 A.

Consumption …………........................................ 0.2 amps idling,

5.5 amps charging.

Voltage Stabilization …....................................... Plus or minus 0.05 f-stop.

Packaging PM400, PM400R................................ Tough, Kydex plastic case.

Packaging PA8…….............................................. Extruded Aluminum case.

Weight PM400, PM400R…................................ 6.2 pounds.

Weight PA8…..................................................... 3.5 pounds, (w flash tube).

Dimensions PM400, PM400R……..................... 9”H x 9.5”W x 6”D

PA8 (housing only)……….…………4.5”H x 4.5”W x 6”D

Flashtube ..................................................……… Plug-in style, use

Photogenic’s C4-19, C4-19C, C4-19D, C4-19F, L4-19 or L4-19C.

Modeling Lamp (each PA8)....................…….	100-Watt Quartz Halogen, ESR.
Overload Protection PM400, PM400R.......…...	Circuit Breaker, 12 Amp.

Overload Protection Fuse PA8..................5 mm X 20 mm, 3 Amp, fast blow.