Limited PhotoMaster Warranty
Photogenic warranties the “standard line” products are free from defects in material and workmanship of the PhotoMaster PM400, PM400R, PM800, PM800R and PA8 units for a period of three years, from date of manufacture. At our choice, we will repair or replace any of the above that is deemed to be defective. This warranty does not cover damages caused by shipping, product abuse or use other than the intended photographic applications.
Any product modifications will render this warranty void. Use of other manufacture’s accessories (including flash tubes and modeling lamps), which restrict normal or intended operation (especially venting airflow on the PA8), may cause damage and will void this warranty.
SERVICE
The photographer should not attempt to make internal repairs.
Consult a dealer for an authorized Photogenic Professional Lighting service agent. This will provide you safety, insure proper operational functions and provide continuation of your warranty.
The technicians find in helpful to have the complete unit to better troubleshoot and evaluate any problems. This includes the light unit, the power cord, light heads, head cables, flash tubes and all modeling lamps.
For replacing the flashtube or modeling lamp, follow the directions and specifications given earlier in this manual in the setup section.
Before removing the old tubes or installing new tubes, always unplug your PhotoMaster to discharge the stored energy. Wait approximately 30 seconds for the main capacitors to deplete any residual stored wattage. Never place your fingers or any metal objects into the flash or modeling sockets. Contact with high voltage may result.
18
