•The cords must not cover up the area shown in the figure below. This is necessary to allow the amplifiers and navigation mechanism to heat dissipate freely.
Display unit |
Do not cover these areas. | Do not cover this area. |
•The semiconductor laser will be damaged if it overheats, so don’t install the product anywhere hot — for instance, near a heater outlet.
•When installing the
•Do not install the display unit in a position where the opening of the LCD panel is obstructed by any obstacles, such as the shift lever. This may cause interference with the shift lever, or a malfunction of the mechanism of the display unit.
English
Español
Deutsch Français Italiano
Nederlands
20
