Pioneer AVIC-N3 installation manual Deutsch Français Italiano Nederlands

		Note:
30-pin cable (supplied)		When Pioneer multi-channel processor (sold separately) is
		connected to this product, make sure the “5.1 CH” mode is
		activated. Please find the correct setting by referring to
3 m (9 ft. 10 in.)		"Switching the 5.1ch setting" in the Operation Manual of the
		navigation system.
	20 cm (7-7/8 in.)		WIRED REMOTE INPUT
			Please see the Instruction
			Manual for the Wired Remote
			Control adapters (sold separately).

20 cm (7-7/8 in.)

English

Display unit

MIC INPUT

The microphone in the voice recognition kit (e.g. CD-VC1) (sold separately) is connected when the voice recognition function is used.

Español

Yellow	DIGITAL OUT
	This is used when connecting
Black	to the Pioneer multi-channel
	processor (sold separately), that is
Power cord	compatible with this product.
	Otherwise this is not used.
	G.SP (Guidance speaker output)
	This is not used normally.
	When combining this product with
IP-BUS cable	Pioneer multi-channel processor
	(sold separately) that is compatible
(supplied with iPod adapter)
	with the product, G.SP will be
	used to output the guidance voice.
Hide-away XM tuner	In this case, the Pioneer external
	speaker (e.g. CD-TS37GP) (sold
(GEX-P10XMT)
	separately) must be connected to
(sold separately)
	the SP-OUT jack (2.5 ø MINI
	JACK, 1W max [16 Ω]).
	For details, see the operation
Black	manual of the external speaker.
Blue	XM DATA cable
Black	(supplied with XM tuner)
	• When combining this product with
*1	GEX-P10XMT (sold separately), this
	connection must be required.
	• When installing the XM tuner in the
Note:	trunk, etc., the extension cable (e.g. CD-
	600DC) (sold separately) is required.
The XM tuner will not receive XM Radio service when
you drive outside of the XM's coverage area. When the
XM tuner is not used, connect the IP-BUS cable*1
directly to the navigation's Hide-away unit*2.

Deutsch Français Italiano

Nederlands

8