Pioneer AVIC-N3 Installing the Hide-away unit, Attach the side brackets to the Hide-away unit

•Install with the left and right sides of the Hide-away unit perpendicular or par- allel to your vehicle’s direction of travel. Do not install diagonally to your vehi- cle’s direction of travel or the current location will be displayed incorrectly.

Forward/Backward direction of vehicle

•Be sure to install the Hide-away unit on the floor with the silk printing side is facing up. The navigation system will operate properly only in this position.

Installing the Hide-away unit

1.Attach the side brackets to the Hide-away unit.

When the Hide-away unit is installed on the floor or the installation board under the pas- senger seat, etc., the side brackets should be attached to the unit.

English

Español

Deutsch Français

Use the following holes in the side brackets.

If the positions of the side plates are shifted in paral- lel you can also use other holes that match up with the holes in the Hide- away unit.

Hide-away unit

Washer faced screw (4 ⋅ 8 mm)

Side bracket

Italiano

Nederlands

22