Installation
DIN Rear-mount
Installation using the screw holes on the side of the display unit
•Fastening the display unit to the factory
Select a position where the screw holes of the bracket and the screw holes of the display unit become aligned (are fitted), and tighten the screws at 2
places on each side. Use any of screws (4 ⋅ 3 mm), binding screws (5 ⋅ 6 mm) or flush surface screws (5 ⋅ 6 mm), depending on the shape of the
screw holes in the bracket.
*1 Use screws (4 ⋅ 3 mm) only.
Display unit
*1
*1
•When installing in a shallow space, use the following screw holes. In this case, stick conceal tape on parts that protrude from the dashboard.
Conceal tape
*1
*1
Display unit | Binding screw |
(5 ⋅ 6mm) |
Dashboard or Console
Factory radio mounting bracket
Fixing the front panel
If you do not operate the removing and attaching the front panel function, use the supplied fixing screws to fix the front panel to the display unit.
•Fix the front panel to the display unit using the fixing screws after removing the frame.
Fixing screw
Fixing screw Front panel
25
