Pioneer AVX-P8DVD Switching the wired remote control setting, 12, Selecting remote control code type, Initial Settings

Switching the wired
remote control setting
Whenusing this unit with a Pioneer head unit
featuringjack for the wired remote control,
youcan operate the basic function of each
sourceby touch panel key.
!Onlywhen using this unit with IP-BUS
mode(S), you can operate this function.
1 TouchA.MENU and INITIAL and then
touchWIRED RMT.
2 Touchato turn wired remote control
on.
#Toturn wired remote control off, touch b.
Selecting remote control
code type
Whenusing this unit with a Pioneer DVD
player,changing the remote control code type
enablesyou to operate this unit only. Select
theappropriate remote code according to the
combinedcomponents.
!Onlywhen using this unit with IP-BUS
mode(S), you can operate this function.
!SelectCODE A when combined with a
DVDnavigation unit.
!SelectCODE B when combined with a
multi-DVDplayer.
Important
Whenchanging the remote control code type,
switchthe remote control selection switch on the
leftside of the remote control to the appropriate
position.(Refer to page 62.)
1 TouchA.MENU and INITIAL and then
touchREM CODE.
2 Touchaor bto select the remote con-
trolcode type.
Touchato select CODE A. Touch bto select
CODEB.
Initial Settings
En
64
Section
12