Adjusting initial settings
1
Initialsettings lets you per form initial setup of
differentsettings for this unit.
1Functiondisplay
Showsthe function names.
1 PressAV SOURCE and hold until the
unitturns off.
2 TouchA.MENU and then touch INITIAL
todisplay the function names.
Thefunction names are displayed and oper-
ableones are highlighted.
#WhenA.MENU is not displayed, you can dis-
playit by touching the screen.
#Youcan also display MENU by clicking the
joystick.
#Toreturn to the previous display, touch BACK.
#Toreturn to the display of each source, touch
ESC.
Switching the warning tone
Ifthe front panel is not detached fromthis
unitwithin five seconds of turning off the igni-
tion,a warning tone will sound. You can turn
offthe warning tone.
!Onlywhen using this unit with ADD-ON
mode(M), you can operate this function.
1 TouchA.MENU and INITIAL and then
touchDT. WARNING.
2 Touchato turn warning tone on.
#Toturn warning tone off, touch b.
Switching the auxiliary setting
Itis possible to use auxiliar y equipment with
thisunit. Activate the auxiliar y setting when
usingauxiliary equipment connectedto this
unit.
!Onlywhen using this unit with ADD-ON
mode(M), you can operate this function.
1 TouchA.MENU and INITIAL and then
touchAUX.
2 Touchato turn auxiliary setting on.
#Toturn auxiliary setting off, touch b.
Switching the automaticdisc playback
Youcan turn automatic disc playback on or off
whenyou insert a disc into the disc loading
slot.When this function is on,the disc will be
automaticallyplayed after it is inserted into
thedisc loading slot.
Initially,this function is set to on.
1 TouchA.MENU and INITIAL and then
touchDVD D. AUTO.
2 Touchato turn automatic disc play-
backon.
#Toturn automatic disc playback off, touch
b.
Initial Settings
En 63
Section
12

InitialSettings