Setting remote controlcode type
Thereare three remote control code types,
codetype A, code type Band code type H/U.
Switchthe remote code according to the com-
binedcomponents.
!H/UOperating this unit with ADD-ON
mode(M)
!AOperatingthis unit with IP-BUS mode
(S)when combined with a DVD navigation
unit
!BOperatingthis unit with IP-BUS mode
(S)when combined with a multi-DVD
player
1 Setthe remote control selection switch
onthe left side of the remote control to
theappropriate position with a pen tip or
otherpointed instrument .
!Ifyou select H/U mode, there is no need to
takethe following procedure.
!Ifyou select A/Bmode, take the following
procedureand change the code type to the
appropriatetype.
2 Press7 and 0 on the remote control si-
multaneouslyto change the code type.
Initially,the code type is set to A. Each time
youpress 7and 0simultaneously on the re-
motecontrol the code type switches between
AandB.
Note
Whenthe remote control operation switch is set
toDVD, changing the remote control code type
enablesyou to operate the Pioneer DVD player
withthe supplied remote control.
Whenoperating the following components only
whichcombined with this unit, be sure to select
codesas follows:
!AOperatinga multi-DVD player
!BOperatinga DVD navigation unit
Setting up the DVD player
En
62
Section
11