Pioneer AXM-P7650 Using the down-mix function, Setting the speaker setting

Adjusting the Music mode
You can adjust the Music mode with the fol-
lowing three controls.
!Panorama (Panorama) extends the front
stereo image to include the surround
speakers for an exciting wraparoundef-
fect.
!Dimension (Dimension) allows you to gra-
dually adjust the sound field either towards
the front or the rear.
!Center Width Control (CenterWControl)
allows center-channel sounds to be posi-
tioned between the center speaker and the
left/right speakers. It improves the left-cen-
ter-right stage presentation for both the dri-
ver and the front passenger.
1 PresspuntilMUSICappearsinthe
display.
2 PressntoselectPanorama.
3 PressqorrtoturnPanorama on/
off.
4 PressnagaintoselectDimension.
5 Pressqorrtoselectyourfavorite
setting.
Each time you press qor rit moves the
sound towards the front or the surrounds.
33is displayed as the front/surround
speaker balance moves from front to sur-
rounds.
6 Pressnagaintoselect
CenterWControl.
7 Pressqorrtoselectyourfavorite
setting.
Each time you press qor rit gradually
spreads the center channel sound into the
front left and right speakers over a range 07.
3is the default and its recommended for
most recordings. 0places all center sound in
the center speaker. 7places all center sound
equally in the left/right speakers.
Using the down-mix function
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1 PressrtoselectDownmix.
Press runtil Downmixappears in the dis-
play.
2 Pressoorptoswitchthedown
mixsettings.
!Lt/RtDown mix so that the surround
components can be restored (decoded).
!Lo/RoStereo mix the original audio that
do not contain channel modes such as sur-
round components.
Setting the speaker setting
You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to LARGE(large)
if the speaker is capable of reproducing
sounds of about 100 Hz or below. Otherwise
select SMALL(small).
!Low frequency range is not output if the
subwoofer is set to OFF and the front and
rear speakers set to SMALLor OFF.
!It is imperative that non-installed speakers
be set to OFF.
!Set the front or rear speaker to LARGEif
the speaker is capable of reproducing bass
content, or if no subwoofer is installed.
Digital Signal Processor
En
24
Section
07