Pioneer AXM-P7650 Adjusting initial settings, Setting the clock

Adjusting initial settings
1
Initial settings lets you perform initial setup of
different settings for this unit.
Important
You can use the following functions only when
the remote control is set to DEQmode.
1Functiondisplay
Shows the function status.
1 PressSOURCEandholduntiltheunit
turnsoff.
2 Pressoandholduntil theclockap-
pearsin thedisplay.
3 Pressotoselectoneoftheinitialset-
tings.
Press orepeatedly to switch between the
following settings:
ClockDimmer(dimmer)Brightness
(brightness)DigitalATT(digital attenuation)
Telephone(telephone muting/attenuation)
AUX(auxiliary setting)Digital1(digital
source 1)Digital2(digital source 2)
Analog1(analog source 1)Analog2 (ana-
log source 2)Analog3(analog source 3)
Analog4(analog source 4)Analog5 (ana-
log source 5)Analog6(analog source 6)
AudioReset (audio reset)
#To cancel initial settings, press BAND.
#You can also cancel initial settings by holding
down ountil the unit turns off.
Setting the clock
Use these instructions to set the clock.
1 Pressotoselectclock.
Press orepeatedly until clock appears in
the display.
2 Pressmorntoselectthesegment
oftheclockdisplayyouwishtoset.
Pressing mor nwill select one segment
of the clock display:
HourMinute
As you select segments of the clock display
the segment selected will blink.